DIY Bubble Bath Powder Recipern (2024)

Home » Wellness » DIY products » DIY Bubble Bath Powder Recipe

As a participant in the Amazon Services LLC Associates Program and other affiliate programs, Easy Homemade Life may collect a share of sales or other compensation from the links on this page. This comes at no additional cost to you, and all the prices and availability are accurate at the time of publishing.

This homemade bubble bath powder makes firm, high-quality, and long-lasting bubbles that will delight bathers of all ages. So scoop and build with them or relax under the suds, however your bathing pleasure, this is a quick DIY project that only takes a few ingredients.

DIY Bubble Bath Powder Recipern (1)

Jump to Recipe

What is Bubble Bath Powder?

Bubbles make everything fun, but nothing more so than bath time. For a child, toddler, baby, or adult, bubble baths are a treat.

Bubble bath powder is a dry bubble bath mixture that acts as a foaming bath powder when you dissolve it in water. It works the same way as bubble bath liquid and fizzing bath bombs do. All you need to do is add a portion to running water and watch it foam up!

Some might know this as foaming bath dust or magic powder bubble bath. Either way, it works well as a homemade bubble bath for kids. So call it whatever you like and share some with everyone you know! It’s an easy last-minute gift for a variety of ages. This dry bubble bath for kids is a great stocking stuffer idea and fun birthday gift for teens.

It’s easy to duplicate this recipe and make enough for everyone in your life. Once you pack the finished bath power into a jar and tie it off with a ribbon, I’m sure you will think of many people who would enjoy it.

DIY Bubble Bath Powder Recipern (2)

How to Make Homemade Bubble Bath Powder

Start by gathering four main ingredients and optional essential oil and colorant. Let’s take a look at the ingredient list together.

Here’s what you need in this recipe to make bubble bath powder.

Tools & Equipment

  • Medium fine mesh strainer
  • Large mixing bowl
  • Metal whisk
  • Mask, recommended
  • Dropper or teaspoon to measure 5 mL
  • Baking sheet
  • Parchment paper
  • Storage jar with lid
DIY Bubble Bath Powder Recipern (3)

Materials

Baking soda – use 1 cup baking soda for the base of this powder

SLSA – this is short for sodium lauryl sulfoacetate, a coconut derived bubble powder. It is not the same as sodium laureth sulfate (even though the names sound the same) which has controversial effects in personal care items. SLSA is a safe foaming agent for babies and people of all ages. I suggest buying it on ETSY.

Citric acid – without citric acid, the powder gets clumpy and is hard to sift. You can also buy citric acid on ETSY.

Essential oil – optional if you like fragrance. Pick any favorite scent like lavender essential oil or lemon essential oil from your essential oil kit.

Colorant – optional; otherwise the powder remains white. You can use liquid or powder colorants. Make sure they are safe for bath and beauty products like this skin safe dye.

Liquid bubble bath – we use 5 teaspoons for the whole recipe, which breaks down to 5 mL (same as 1 tsp) liquid bubble bath solution per ½ cup dry powder. I’d opt for a mild bubble bath so you can customize it with your own essential oils rather than one with a heavy scent.

If you decide you’d rather buy bath powder before making a batch yourself, order from Busbees Bath Shoppe.

DIY Bubble Bath Powder Recipern (4)

Step-By-Step Directions

There are only fifteen minutes of active time, but the project needs 12-24 hours to dry. Starting this over the weekend when you have a few days off in a row is a great time to make bubble bath powder!

Mix the formula

Measure the ingredients and use a metal whisk or spoon to sift the baking soda and SLSA powder through a fine mesh strainer placed over a large mixing bowl. Wear a mask and work in a well ventilated area to prevent breathing in the powders as you mix ingredients together.

Next, stir in citric acid.

If you are adding essential oils and color dye, now is the time. Begin with 40 drops of essential oil (your choice of scent) and 10 drops of liquid dye. Mix well, test, and adjust as you see fit.

You can get fancy with the colors if you want. Divide the total batch into multiple smaller bowls and make as many colors as you like. Follow these color palette tips for picking the perfect colors!

When it comes time for storing, you can make an exquisite display of what looks like colored sand art, but I suggest sticking to a basic layering technique for practical purposes. It’s easy enough for kids to do too, so bring your helpers over if you have them!

Let’s get back to the powder. Our final step for making the mixture is measuring the liquid bubble bath with a dropper or teaspoon and squirting it over the dry powder. Mix again well.

Wait for it to dry

Line a flat surface like a rimmed baking sheet or 9×13-inch glass baking dish with parchment paper and spread the powder in a thin, even layer.

Wait 12-24 hours until dries completely.

Store & Use

Now that the powder is dry, lift the paper liner, curl it into a tight taco shape and dump it all into a strainer resting over a bowl for the last sifting. Use the back of a spoon to break apart all lumps.

The end result should flow out of your fingers like dry sand. It’s a light, even weight material that is ready to pour and has no lumps.

Transfer the powder from the bowl to recycled jars or mason jars with open cut daisy lids. The daisy lids are great for pouring out of, but I suggest placing a piece of plastic wrap over the jar first and then screwing the lid on. This will prevent any powder from spilling accidentally. Trim off any plastic that extends past the lid.

If you store with a closed lid, double check that the powder is bone dry (no moisture left!) before bottling for storage. Even the smallest amount of moisture could negatively react with the citric acid and cause built up pressure that eventually breaks the bottle. We don’t want that!

Store the powder in the bathroom and use as often as you like by adding four tablespoons to running water as you fill up the bath. This recipe yields 2.5 cups which is enough for 10 baths. Treat your kids or your self for a Sunday self-care soak.

DIY Bubble Bath Powder Recipern (5)

More DIY Bath and Beauty Recipes

  • DIY Bath Confetti with Rice Paper
  • DIY Turmeric Soap Recipe
  • Best DIY Face Mask for Dry Skin
  • Homemade Body Salt Scrubs Recipes with Essential Oils

Bubble Bath Powder Recipe

This homemade bubble bath powder makes firm, high-quality, and long-lasting bubbles that will delight bathers of all ages. So scoop and build with them or relax under the suds, however your bathing pleasure, this is a quick DIY project that only takes a few ingredients.

Active Time15 minutes mins

Additional Time12 hours hrs

Total Time12 hours hrs 15 minutes mins

Course: Bath & Beauty

Keyword: bubble bath powder recipe, DIY bubble bath, dry bubble bath

Yield: 2 .5 cups; 10 baths

Author: Jessica Haggard

Cost: $10

Equipment

  • 1 Medium fine mesh strainer

  • 1 Large mixing bowl

  • 1 Metal whisk

  • 1 Mask recommended

  • 1 Dropper to measure 5 mL or teaspoon

  • 1 Baking sheet

  • 1 Parchment paper

  • 1 Storage jar with lid

Materials

Instructions

  • Use a metal whisk or spoon to sift the baking soda and SLSA powder through a fine mesh strainer placed over a large mixing bowl. Wear a mask and work in a well ventilated area to prevent breathing in the powders as you mix ingredients together.

  • Stir in citric acid. If you are adding essential oils and color dye, now is the time. Begin with 40 drops of essential oil (your choice of scent) and 10 drops of liquid dye. Mix well, test, and adjust as you see fit.

  • Measure the liquid bubble bath with a dropper or teaspoon and squirt it over the dry powder. Mix again well.

  • Line a flat surface like a rimmed baking sheet or 9×13-inch glass baking dish with parchment paper and spread the powder in a thin even layer. Wait 12-24 hours until dries completely.

  • Once dry, lift the paper liner up, dump the contents into a strainer resting over a bowl for the last sifting. Use the back of a spoon to break apart all lumps.

  • Transfer the powder to a storage jar and keep in the bathroom for use. Add 3-4 tbsp under running water as you fill the bath.

Notes

Double check that the powder is bone dry (no moisture left!) before bottling for storage. Even the smallest amount of moisture could negatively react with the citric acid and cause built up pressure that eventually breaks the bottle. We don’t want that!

Storing in mason jars with open cut daisy lids is the ideal presentation for easy pouring and makes a great gift.

I share more important notes and tips in the post above (like where to find ingredients, how to make a multicolor powder, and more). Please read the whole post before making the recipe!

Tried this recipe?Please consider Leaving a Review!

DIY Bubble Bath Powder Recipern (2024)
Top Articles
Latest Posts
Recommended Articles
Article information

Author: Barbera Armstrong

Last Updated:

Views: 5662

Rating: 4.9 / 5 (59 voted)

Reviews: 82% of readers found this page helpful

Author information

Name: Barbera Armstrong

Birthday: 1992-09-12

Address: Suite 993 99852 Daugherty Causeway, Ritchiehaven, VT 49630

Phone: +5026838435397

Job: National Engineer

Hobby: Listening to music, Board games, Photography, Ice skating, LARPing, Kite flying, Rugby

Introduction: My name is Barbera Armstrong, I am a lovely, delightful, cooperative, funny, enchanting, vivacious, tender person who loves writing and wants to share my knowledge and understanding with you.